High-performance self-polishing antifouling for areas with very heavy fouling. Suitable for all hull materials, including aluminium without risk of galvanic corrosion. It protects against slime, algae, mussels and barnacles; the surface renews evenly while underway to keep the hull smooth and clean throughout the season. • Suitable for GRP, wood, steel and aluminium hulls • Can be burnished during the season for a very smooth, low-drag finish • Available in bright, durable colours, including white • For vessels up to 40 knots • For underwater areas of sailing and motor boats • Brush or roller application; spraying for professional use only • Use SEAJET Thinner A • Colours: white, black, navy blue, medium blue, light red • Pack sizes: 0.75 L / 2.5 L / 5 L / 20 L • Coverage: approx. 10 m²/L per coat (theoretical) • Film thickness per coat: 100 μm wet / 56 μm dry • Application temperature: air 5–35 °C; substrate 7–35 °C • Maximum time before launching: 6 months after application • Shelf life: at least 2 years at 20 °C • Drying at 20 °C: touch dry 3 hours; fully dry 12 hours; recoat after at least 8 hours; launch after at least 18 hours Recommended coating systems: GRP and steel—SEAJET 117 Multipurpose Epoxy Primer plus 2 coats; wood—SEAJET 015 Underwater Primer plus 2 coats; aluminium—SEAJET 117 Multipurpose Epoxy Primer plus 2 coats. Hazard pictograms: GHS02, GHS07, GHS08 and GHS09. Read the label and safety data sheet before use.